3000W Inverter Wiring Kit – 00 B&S Battery Cable + ANL Fuse Holder

3000W Inverter Wiring Kit – 00 B&S Battery Cable + ANL Fuse Holder

Build a reliable high-current connection between your battery bank and inverter with the Razorback DC 3000W Inverter Wiring Kit, designed primarily for 3000W inverter installations in 12V auxiliary power systems.

This heavy-duty kit includes premium Australian Made 00 B&S 64.15mm² battery cable, ANL fuse protection, cable lugs and heat shrink, giving you the core components required for a clean and professional battery-to-inverter installation.

Ideal for 4WDs, caravans, camper trailers, canopies, lithium battery systems and off-grid power setups, the kit is available with selectable red and black cable lengths to suit different installation layouts.

⭐ Key Benefits

• Designed primarily for 3000W inverter installations
• Includes heavy-duty 00 B&S 64.15mm² battery cable
• Australian Made cable using 99.98% oxygen-free copper
• Rated up to 292A at 30°C
• Includes ANL fuse holder and selectable ANL fuse
• Supplied with heavy-duty cable lugs and heat shrink
• Red and black cable supplied for positive and negative connections
• Available in multiple cable length options
• Ideal for lithium and AGM battery systems
• Suitable for 4WD, caravan, marine and off-grid installations

🔋 Heavy-Duty 00 B&S Battery Cable

The kit uses premium 00 B&S single core battery cable with a nominal conductor area of 64.15mm².

Manufactured in Australia from 99.98% oxygen-free copper, the cable provides excellent conductivity and low electrical resistance for demanding high-current inverter applications.

Cable features include:

• 00 B&S / 64.15mm² conductor
• Up to 292A current rating at 30°C
• 99.98% oxygen-free copper
• V90 PVC insulation
• Australian Made
• Red and black cable supplied

⚡ Designed for 3000W Inverter Systems

High-power inverters require heavy-duty battery cabling to handle the large DC current drawn from the battery bank.

This kit is designed primarily for 3000W inverter installations, providing a convenient combination of heavy battery cable, circuit protection and termination components.

It is suitable for installations including:

• Pure sine wave inverters
• Caravan inverter systems
• 4WD canopy power systems
• Camper trailer electrical systems
• Lithium battery banks
• AGM battery banks
• Solar and off-grid battery systems
• Auxiliary power installations

🛡️ ANL Fuse Protection

A high-current inverter circuit should include appropriately rated circuit protection close to the battery supply.

This kit includes a heavy-duty ANL fuse holder and selectable ANL fuse to help protect the battery cable and electrical system against excessive current and short-circuit faults.

Always select the fuse rating according to:

• Inverter manufacturer requirements
• Cable current capacity
• Battery system configuration
• Installation length
• Expected operating current

📏 Selectable Cable Lengths

Choose the cable length that best suits your installation.

Available options include:

• 1 metre Red + 1 metre Black
• 1.5 metre Red + 1.5 metre Black
• 2 metre Red + 2 metre Black

Keeping battery-to-inverter cable runs as short as practical can help minimise voltage drop and improve inverter performance.

🚙 Ideal for 4WD, Caravan & Off-Grid Power Systems

This inverter cable kit is suitable for a wide range of auxiliary electrical installations, including:

• 4WDs
• Caravans
• Camper trailers
• Vehicle canopies
• Touring vehicles
• Marine electrical systems
• Off-grid solar systems
• Battery boxes
• Lithium battery banks
• AGM auxiliary battery systems

🔧 Supplied Ready for Custom Termination

The cable lugs are supplied loose and are not pre-crimped, allowing the installer to cut and terminate the cables to suit the exact layout of the installation.

This is ideal for custom inverter installations where cable routing and terminal positions vary between vehicles and battery systems.

🧰 Installation Difficulty

🟠 3/5 – Intermediate

Installation requires correctly crimping heavy-duty cable lugs, selecting appropriate fuse protection and securely connecting the inverter and battery terminals.

Professional installation is recommended if you are unfamiliar with high-current DC electrical systems.

🔍 Product Features

• 3000W inverter wiring kit
• Australian Made 00 B&S battery cable
• 64.15mm² oxygen-free copper conductor
• Up to 292A cable rating at 30°C
• V90 PVC insulation
• Red and black battery cable
• ANL fuse holder
• Selectable ANL fuse
• Heavy-duty copper cable lugs
• Heat shrink supplied
• Selectable cable lengths
• Suitable for 12V auxiliary power systems
• Ideal for lithium and AGM battery installations

• 📦 What's Included

  • 1 × Red 00 B&S battery cable – selected length
  • 1 × Black 00 B&S battery cable – selected length
  • 1 × Heavy-duty ANL fuse holder
  • 1 × ANL fuse – selected rating
  • 6 × Heavy-duty cable lugs
  • 4 × Heat shrink pieces

  Cable lugs are supplied loose and are not pre-crimped.

• ⚠️ Important Installation Note

  This kit is designed primarily for 3000W inverter installations.

  Suitability for higher-output inverters depends on factors including system voltage, cable length, inverter efficiency, battery configuration and the inverter manufacturer's installation requirements.

  Always follow the inverter manufacturer's specified cable size and fuse recommendations.